Description
Rabbet bits are used to cut a square recess into the edge of a board. The height of the cut is determined by the cutting length of the bit and the depth setting on the router. The depth of cut is determined by the size of the bearing on the bit. Standard rabbet bits come with one bearing, which can be changed to alter the depth of cut. We offer a full range ofbearingsfor this purpose.
We also offermulti-bearingversions of the bits marked below with a♦.
| Large Diameter |
Cutting Length A |
Cutting Depth B |
Bearing Size |
Shank | HW # | WM # |
|---|---|---|---|---|---|---|
| 1-3/8″ | 1/2″ | 1/2″ | 3/16″ x 3/8″ | 1/4″ | 109412 | 1951♦ |
| 1-3/8″ | 1/2″ | 1/2″ | 3/16″ x 3/8″ | 1/2″ | 109232 | 1954♦ |
| 1-1/2″ | 1/2″ | 1/2″ | 3/16″ x 1/2″ | 1/2″ | 102248 | 1922 |
| 1-7/8″ | 1″ | 3/4″ | 3/16″ x 3/8″ | 1/2″ | 109272 | 1959♦ |
| ♦Also available as amulti-bearing rabbet bit. |
About Whiteside
Whiteside Machine Company was founded in 1970 in Bill Whiteside’s basement where he supplied tooling to NC’s huge furniture making industry. Whiteside is still family-owned but has now grown to occupy a 40,000 square foot factory in Claremont, NC.
Whiteside offers a full range of router bits. Their rigid quality control and precision manufacturing techniques have repeatedly resulted in highest ratings inFine Woodworkingmagazine tool reviews.
In the years that we’ve sold Whiteside router bits, we’ve experienced the company’s commitment to excellent quality and superb customer service. We think you’ll be pleased each time you use these fine tools in your shop.
We toured the Whiteside factory inEpisode 1ofThe Highland Woodworker.Watch thewhole episodeorjust the factory tour(about 6:30).
Reviews
There are no reviews yet.