Powermatic DT45 Dovetailer/Manual Clamp

Description

Powermatic DT45 Dovetailer/Manual Clamp

The POWERMATIC DT45 manual dovetail machine is specifically designed for cutting dovetails used in drawer construction and various furniture components. It features an adjustable router spindle that enables precise control over the heights of the dovetails. The DT45 can produce four different types of dovetails, each with a unique pitch. The pieces are secured and released manually using an eccentric clamp.

Details:

• Four centerlines – 1″, 1-1/2″, 2″, and 2-1/2″ – create a custom appearance
• Manual eccentric clamping will keep boards firm
• Eccentric spindle collet for resharpened cutters
• Spring-loaded carriage makes for smooth, effortless dovetail cutting
• Cutter height of 3/16″ to 3/4″ accommodates different cutting depths and board thicknesses
• Extra-large soft grip handle provides positive control and comfort
• The precision linear carriage bearings are sealed on both ends to eliminate dust buildup
• Visual stylus and template aid in guiding the carriage
• Material stops provide convenient positioning of the workpiece
• Cast iron and steel construction for added stability and durability
• 1HP motor transfers plenty of power via the drive belt to the spindle

Standard Equipment:

• Four-sided template
• Workstops
• Tool kit
• Dovetail bit
• Dust chute with hose

Specifications:

• Model #: DT45
• Brand: Powermatic
• Warranty: 5 Year
• Motor HP: 1HP
• Motor Phase: 1Ph
• Motor Voltage: 115/230V
• Prewired: Prewired 115V
• Minimum Work Piece Size (L x W/in.): 7-7/8″ x 2-3/8″
• Maximum Work Piece Size (L x W/in.): 31″ x 11″
• Minimum Dovetail Height (in.): 3/16″
• Maximum Dovetail Height (in.): 3/4″
• Minimum Front Thickness (in.): 9/32″
• Maximum Front Thickness (in.): 1-3/4″
• Minimum Side Thickness (in.): 9/32″
• Maximum Side Thickness (in.): 1-3/16″
• Number of Spindles: 1
• Spindle Speed (RPM): 18500
• Center to Center Dovetail Spacing (in.): 1″, 1-1/2″, 2″, and 2-1/2″
• Table Height From Floor (in.): 35″
• Dust Port Diameter (OD/in.): front 2-1/2″, rear 4.”