Speedhut 3-3/8″ Quad Met Water Temp/Volt/Oil PSI/Fuel Lev (R3-QG1-REV)

Description

The Speedhut 3-3/8″ Quad Met Water Temp/Volt/Oil PSI/Fuel Lev (R3-QG1-REV) offers a comprehensive solution for monitoring your vehicle’s most critical systems. This single, space-saving gauge provides real-time readings for water temperature, voltage, oil pressure, and fuel level, ensuring you have the vital information needed for optimal vehicle performance and maintenance. Designed for accuracy and ease of installation, this gauge is a valuable addition to any dashboard.

KEY FEATURES AND BENEFITS:

• Four-in-One Monitoring: Integrates water temperature, voltage, oil pressure, and fuel level into a single, easy-to-read display, reducing clutter and simplifying your dashboard layout.
• Essential Vehicle Data: Provides immediate insight into key engine and electrical system parameters, helping you identify potential issues early.
• Metric Temperature Reading: Displays water temperature in Celsius (50-125°C), a widely used and precise unit of measurement.
• Broad Voltage Compatibility: Monitors a voltage range of 6-18 volts, suitable for a variety of vehicle electrical systems.
• Standard Oil Pressure Measurement: Tracks oil pressure from 0-100 psi, allowing you to ensure proper engine lubrication.
• Versatile Fuel Level Compatibility: Designed to work with most standard fuel level sensors that have a resistance of 300 ohms or less.
• Integrated Warning Light: Features a built-in warning light to alert you to critical conditions in monitored systems.
• LED Illumination: The included 3 ft Power & Lighting Harness suggests LED backlighting, providing excellent visibility in all lighting conditions.
• Included Sensors: Comes with a 100 psi pressure sensor for oil pressure readings and a Speedhut temperature sensor for water temperature monitoring.
• Complete Wiring: Includes all necessary wiring harnesses for power, lighting, the pressure sensor, and the temperature sensor, simplifying the installation process.

SPECIFICATIONS:

• Gauge Type: Quad Gauge
• Voltage Range: 6-18 volts
• Water Temperature Range: 50-125 °C
• Fuel Level Range: E-F
• Oil Pressure Range: 0-100 psi
• Size: 3 3/8 inch
• Hole Size: 3.28 inch (83mm)
• Units: Metric (Water Temperature)
• Warning Light: Yes
• Fuel Level Signal Compatibility: 300 ohms or less (Fuel Level Sensor Not Included)
• Included Components:
  • 3 ft Power & Lighting Harness – for LED Lit Gauges and Clocks
  • Pressure Sensor – 100 psi
  • Pressure Gauge Wiring Harness (3-Wire Cable)
  • Temperature Gauge Wiring Harness (2-Wire Cable)
  • Speedhut Temperature Sensor
  • Wiring Harness (2-Wire Cable)

HOW TO USE:

1. Mount the Gauge: Carefully position the gauge in a 3.28 inch (83mm) diameter hole in your dashboard and secure it using the provided mounting hardware.
2. Connect Power and Lighting: Utilize the 3 ft Power & Lighting Harness to connect the gauge to a suitable power source and ensure the LED illumination functions correctly.
3. Install Pressure Sensor: Mount the included 100 psi pressure sensor to the appropriate port on your engine for oil pressure readings.
4. Connect Pressure Sensor Wiring: Use the 3-wire Pressure Gauge Wiring Harness to connect the pressure sensor to the corresponding terminals on the back of the gauge.
5. Install Temperature Sensor: Mount the included Speedhut Temperature Sensor in the designated location for monitoring water temperature (typically in a coolant passage).
6. Connect Temperature Sensor Wiring: Use the 2-wire Temperature Gauge Wiring Harness to connect the temperature sensor to the correct terminals on the gauge.
7. Connect Fuel Level Sensor (Not Included): If you have a fuel level sensor with an output of 300 ohms or less, connect it to the designated terminals on the gauge using the additional 2-wire Wiring Harness. Refer to the gauge’s specific wiring diagram and your fuel level sensor’s instructions for proper connection.
8. Verify Connections: Double-check all wiring connections to ensure they are secure and correct before starting your vehicle.
9. Monitor Readings: Once the installation is complete, start your vehicle and observe the gauge to ensure it is displaying accurate readings for water temperature, voltage, oil pressure, and fuel level. The warning light will illuminate if any monitored parameter falls outside of a safe range (specific warning thresholds may be programmable; consult the gauge’s manual).

BENEFITS OF USING THE SPEEDHUT 3-3/8″ QUAD MET WATER TEMP/VOLT/OIL PSI/FUEL LEV (R3-QG1-REV):

• Centralized Information: Provides a single point of monitoring for multiple critical vehicle systems, enhancing situational awareness for the driver.
• Space Efficiency: Consolidates four individual gauges into one, freeing up valuable dashboard space for other accessories or a cleaner aesthetic.
• Early Problem Detection: Allows for the early identification of potential issues with engine temperature, electrical system health, and oil pressure, potentially preventing more significant and costly repairs.
• Fuel Management: Provides a clear indication of fuel level, helping you avoid running out of fuel unexpectedly.
• Enhanced Vehicle Monitoring: Offers a more comprehensive understanding of your vehicle’s vital signs compared to relying solely on factory warning lights.
• Simplified Installation (with included sensors): The inclusion of pressure and temperature sensors, along with the necessary wiring harnesses, streamlines the installation process for these parameters.
• Improved Visibility: The LED backlighting ensures clear and easy readability of the gauge, day or night.

FEATURES:

• Integrated Four-in-One Display: Combines water temperature, voltage, oil pressure, and fuel level readings in a single, compact unit.
• Metric Water Temperature Display: Shows coolant temperature in degrees Celsius for precise monitoring.
• Wide Voltage Monitoring Range: Accurately displays voltage levels from 6 to 18 volts.
• Standard Oil Pressure Measurement: Indicates oil pressure within a 0-100 psi range.
• Broad Fuel Level Sensor Compatibility: Designed to function with most fuel level senders outputting 300 ohms or less.
• Onboard Warning Indication: Includes a dedicated warning light to signal abnormal operating conditions.
• Bright LED Backlighting: Ensures excellent visibility of the gauge readings in various ambient light levels.
• Included Oil Pressure Transducer: Comes with a sensor specifically for measuring oil pressure.
• Provided Coolant Temperature Sensor: Includes a sensor designed for accurate water temperature readings.
• Pre-Packaged Wiring Harnesses: Simplifies the electrical connections for power, lighting, and the included sensors.