American Forge & Foundry 35-Ton Air/Hydraulic Axle Jack (535A)

Description

The American Forge & Foundry 35-Ton Air/Hydraulic Axle Jack (535A) is specifically engineered for rigorous use in lifting trucks, buses, trailers, and other heavy-duty equipment. This jack combines power with practical design, making it an essential tool for professional service environments, fleet maintenance, and roadside assistance. Its compact form factor, efficient operation, and user-friendly features ensure reliable performance under demanding conditions. The Model 535A stands out with its ability to adapt to various operational needs, offering both air and manual hydraulic lifting capabilities. It’s designed not just for strength, but also for ease of use and space efficiency, with features like large, durable wheels for positioning and a unique vertical storage option.

KEY FEATURES AND BENEFITS:

• High Capacity Lifting: With a 35-ton capacity, this jack provides ample power to safely lift the heaviest vehicles, including large trucks, buses, and construction equipment.
• Versatile Operation: Operate the jack using your shop air supply (90-180 PSI) for quick, effortless lifts, or use it manually when air is unavailable, offering flexibility in any work environment.
• Extended Reach: A generous 55-inch long body allows you to easily reach lift points far under vehicles with long overhangs, simplifying the process of positioning the jack correctly.
• Superior Maneuverability: Equipped with large polyurethane wheels, the jack can be smoothly and easily positioned under a load, even on various workshop surfaces.
• Space-Saving Design: Its unique engineering enables the jack to be stored vertically when not in use, significantly conserving valuable floor space in your garage or service bay.
• Enhanced Safety: A built-in safety valve prevents the jack from being used beyond its rated capacity, protecting both the equipment and the operator from potential overloading.
• Impressive Lift Height: Capable of lifting loads up to 21.25 inches with its screw extension, providing sufficient clearance for various maintenance and repair tasks.

SPECIFICATIONS:

• Model: 535A
• Capacity: 35 tons
• Ram Lift: 5.75 inches
• Low Height: 11 inches
• High Height: 21.25 inches
• Reach: 55 inches
• Width: 8 inches
• Ship Weight: 101 lbs.

HOW TO USE:

• Prepare the Vehicle: Ensure the vehicle is on a flat, stable surface. Engage the parking brake and block the wheels that will not be lifted to prevent accidental movement.
• Position the Jack: Roll the AFF 535A axle jack to the desired lift point under the vehicle. Use the large wheels to maneuver it precisely until the saddle is directly under a secure jacking point specified by the vehicle manufacturer.
• Connect Air Supply (Optional): If using air operation, connect an air hose (90-180 PSI) to the jack’s air inlet. Ensure the connection is secure.
• Engage Lifting Mechanism:
  • Air Operation: Slowly open the air control valve to begin lifting the vehicle. Monitor the lift progress.
  • Manual Operation: Use the pump handle to manually pump the jack, raising the saddle to the desired height.
• Lift the Vehicle: Continue lifting until the vehicle reaches the necessary height for your work. Do not exceed the jack’s 35-ton capacity or its maximum lift height of 21.25 inches.
• Secure with Stands: Once the vehicle is lifted, always place appropriately rated jack stands under secure points on the vehicle. Lower the vehicle onto the jack stands. Never work under a vehicle supported only by a jack.
• Lower the Vehicle:
  • Slightly raise the vehicle off the jack stands using the jack.
  • Carefully open the release valve (or air control valve for air operation) to slowly lower the vehicle back onto the ground. Ensure the descent is controlled.
• Store the Jack: Once the vehicle is fully lowered and stable, remove the jack. The unique design allows for vertical storage, saving space in your workshop.

BENEFITS OF USING AMERICAN FORGE & FOUNDRY 35-TON AIR/HYDRAULIC AXLE JACK (535A):

• Enhanced productivity with dual air/manual operation for faster lifting.
• Improved accessibility thanks to its 55-inch reach for hard-to-access lift points.
• Optimized workspace due to compact design and vertical storage capability.
• Reliable performance from robust materials and heavy-duty construction.
• Operator safety through built-in overload protection valve.
• Effortless positioning with large, durable polyurethane wheels.

FEATURES:

• Heat-treated pistons
• Corrosion-resistant aluminum and nylon composite air motor
• Dual return springs
• Air-assisted lowering
• Heavy-duty steel saddle
• Compact physical footprint
• Designed for vertical storage
• Built-in safety overload valve
• Operates with standard shop air (90-180 PSI)
• Manual pump capability
• Polyurethane wheels for easy movement