Description
Shown with optional accessories(Casters, In/Out Tables and Abrasive Rack – not included)
Does not ship with cord or plug.
INTELLISAND TECHNOLOGY
- Eliminates the guess-work of manually controlling the infinitely-variable feed speed
- Simplifies the sanding operation
- Provides a consistent finish even with varying grain pattern and density
- Greatly increases abrasive planing and dimensioning speed
- Maintains highest possible feed rate without overload
- Standard on all 220 Volt Series drum sander models
37×2
- Continuous-duty 5HP motor, 208- 230 Volt power, single or 3 Phase
- INTELLISAND automatic control of the infinite-variable feed rate (0-15 ft./min.) for the conveyor gives a perfect finish
- Multiple grit sanding in single pass with double drum models
- Precisely dimension stock within .010 across width of sander
- 25 wide sanding capacity
- Height of the rear drum is independently adjustable in relationship to the front drum
- Optional ProScale depth gauge allows incredible accuracy
- Precision-flattened steel conveyor bed reinforced with four steel cross sections for no flex
- Self-cooling drum with abrasive
- Take- Up-Fasteners make changing abrasive quick and easy plus keeping abrasives tight
- 6″ Thickness capacity on the 25″ and 12″ on the 37″ and 50″
- Sand as thin as 1/32 and as short as 2-1/4 (single drum) 3-1/2 (double drum) models
- Cast stand, zinc-plated steel bed, centerless ground column tubes
- Dust Collection- mandatory for all models: 25 – 600 CFM min.
- Shipped assembled, some minimal assembly required
- Drum ball bearings are sealed and permanently lubricated
Specifications:
- Drum(s): Extruded aluminum
- Drum Speed: 1600 RPM
- Dust Hood: Hinged back steel with one 4″ vacuum port
- Height Adjustment (in): 3/32 per turn, Depth Gauge with locking stop
- Ball Bearings 1″ – 2 per drum (2 or 4)
- Conveyor Motor: INTELLISAND TECHNOLOGY controlled 100 in.-lb. torque, direct drive D.C. motor, Infinitely variable 0-15 feet per minute
- Drive Motor (TEFC): 5 HP, 1740 RPM;208-230V, 60HZ;continuous-duty
- Power Requirements: 1 Ph, 30 amp service
- Includes casters
Reviews
There are no reviews yet.