Description
Fast-Flo 1:1 pumps are designed to operate at air input pressures up to 180 psi (12 bar, 1.2 MPa) and deliver a smooth, reliable flow.
Ideal for lower viscosity fluids. Stubby length models are used for wall mount siphon feed applications.
- Air-powered for high reliability and low cost
- Delivery up to 5 gpm (19 lpm)
| TYPE | Pneumatic Piston Pump |
|---|---|
| AIR INLET SIZE (IN) | 1/4 |
| AIR INLET SIZE (MM) | 6.35 |
| AIR INLET THREAD GENDER | Female |
| AIR INLET THREAD TYPE | NPT |
| APPLICATION | Industrial |
| COMPATIBLE MATERIAL | Water, Antifreeze, Windshield Washer Fluid, Used Oil, Used Antifreeze |
| CYCLES PER GALLON | 25 |
| FLUID INLET SIZE (IN) | 1-1/2 |
| FLUID INLET SIZE (MM) | 38.1 |
| FLUID INLET THREAD GENDER | Female |
| FLUID INLET THREAD TYPE | NPT |
| FLUID OUTLET SIZE (IN) | 3/4 |
| FLUID OUTLET SIZE (MM) | 19.05 |
| FLUID OUTLET THREAD GENDER | Female |
| FLUID OUTLET THREAD TYPE | NPT |
| FOR USE WITH | Oil, |
| INCLUDES | Pump-Lower Assembly |
| MAXIMUM AIR INLET PRESSURE (BAR) | 12.41 |
| MAXIMUM AIR INLET PRESSURE (KPA) | 1241 |
| MAXIMUM AIR INLET PRESSURE (PSI) | 180 |
| MAXIMUM CONTINUOUS CYCLE RATE (CPM) | 100 |
| MAXIMUM FLOW RATE (GPM) | 5 |
| MAXIMUM FLOW RATE (L/MIN) | 18.93 |
| MAXIMUM INTERMITTENT CYCLE RATE (CPM) | 100 |
| MAXIMUM WORKING PRESSURE (BAR) | 12.4 |
| MAXIMUM WORKING PRESSURE (KPA) | 1250 |
| MAXIMUM WORKING PRESSURE (PSI) | 180 |
| MODEL | Fast-Flo |
| POWER TYPE | Pneumatic |
| PUMP RATIO | 1:1 |
| SEAL MATERIAL | Rubber |
| SOUND POWER LEVEL (DB(A)) | 82 |
| SOUND PRESSURE LEVEL (DB(A)) | 72 |
| WEIGHT (LB) | 20 |
| WETTED MATERIAL | 303 Stainless Steel, 304 Stainless Steel, 316 Stainless Steel, Buna-N, Cadmium-Plated Ductile Iron, Chrome-Plated Steel, Zinc-Plated Steel, PTFE, Fluoroelastomer, Polyethylene |
| WEIGHT (KG) | 0.9080 |
| MAXIMUM WORKING PRESSURE (MPA) | 1.2 |
Reviews
There are no reviews yet.