Jet J-7040M-4 3PH 460V 10X16 Horizontal Mitering Bandsaw (414484)

Description

The Jet J-7040M-4 3PH 460V 10X16 Horizontal Mitering Bandsaw (414484) is a heavy-duty metal cutting saw designed for industrial applications. Its unique design features a swiveling head that allows for precise miter cuts (0° to 45°) while the workpiece remains stationary, minimizing setup time and ensuring accuracy.

KEY FEATURES AND BENEFITS:

• Swiveling Head for Miter Cuts: Achieve precise miters from 0° to 45° without repositioning the material.
• Variable Speed Drive: Fine-tune the blade speed (100-350 SFPM) for optimal cutting performance based on the material thickness and type.
• Hydraulic Downfeed System: Ensures consistent and controlled blade pressure for clean cuts.
• Heavy-Duty Construction: Features a robust frame, hardened and ground gears, and cast iron blade wheels for long-lasting durability.
• Coolant System: Extends blade life and improves cut quality by reducing heat buildup.
• Adjustable Blade Guides with Six-Point Contact: Provides superior blade support and minimizes vibration for accurate cuts.

SPECIFICATIONS:

• Model Number: J-7040M-4
• Blade Wheel Diameter: 14″
• Drive: Variable Speed
• Motor: 2 HP, 3-Phase, 460V (or 2HP, 230/460VAC, 3ph) – Verify voltage compatibility before purchase.
• Overall Dimensions (L x W x H): 76″ x 30″ x 48″ (or 79″ x 31″ x 41″) – Confirm dimensions with supplier for accuracy.
• Weight: 1134 lbs (or 924 lbs)
• Cutting Capacity (Rectangular at 90 degrees): 10″ x 14″ and 2″ x 16″ (or 10 x 16″)
• Cutting Capacity (Rectangular at 45 degrees): 8-1/2″ x 9″
• Cutting Capacity (Round at 45 degrees): 8-1/2″
• Cutting Capacity (Round at 90 degrees): 10″
• Vise Swivel: 45°
• Blade: 1″ x .035″ x 135″ Bi-Metal
• Variable Speed Drive: 100 – 350 SFPM

HOW TO USE:

1. Secure the workpiece in the vise: Ensure the material is properly clamped and positioned for the desired cut.
2. Adjust the blade guide rollers: Set the rollers to match the width of the blade for optimal support.
3. Set the desired cutting angle: If performing a miter cut, swivel the head to the required angle using the protractor.
4. Power on the saw and adjust the variable speed control: Select the appropriate blade speed based on the material thickness and type.
5. Engage the downfeed system: The hydraulic system will gradually lower the saw head into the material.
6. Guide the material through the saw: Maintain a steady feed rate for a clean and controlled cut.
7. Power off the saw and allow the blade to come to a complete stop before raising the saw head.
8. Clean the work area and dispose of metal shavings.

BENEFITS OF USING JET J-7040M-4 3PH 460V 10X16 HORIZONTAL MITERING BANDSAW (414484):

• Increased Cutting Efficiency: The swiveling head reduces setup time for miter cuts, saving you valuable production time.
• Enhanced Cutting Accuracy: Variable speed control and precise blade guides ensure clean and accurate cuts on a variety of materials.
• Durable Construction: Built to withstand demanding industrial environments, this saw delivers long-lasting performance.
• Improved Workpiece Handling: The stationary workpiece simplifies material handling and reduces the risk of accidents.
• Versatility: Handles a wide range of metal cutting tasks, from straight cuts to miters, on various material thicknesses and sizes.

FEATURES:

• Swiveling head for miter cuts (0° to 45°)
• Variable speed drive (100-350 SFPM)
• Hydraulic downfeed system
• Heavy-duty construction
• Coolant system