Graco 2A30041 Wolverine® Drive Module, 115 VAC, 1/5 HP Motor

Description

Wolverine chemical injection pumps are designed for injecting chemicals at well sites and pipelines to protect from corrosion, plugging, and freezing.

• Wolverine pumps reduce emissions to the atmosphere and have a greater level of control when used with our injection rate controllers.
• Our injection pumps are designed for years of operation before simple repairs.
• Each pump features an adjustable fluid packing that can last up to 25 times longer than non-adjustable seals.
• Designed to operate in environments from -40° F to 175°F (-40°C to 79°C). They have 316 SST wetted parts, plus they’re sealed against water and dust.
• Flow rates up to 430 gpd (1,628 lpd) and a pressure rating up to 10,000 psi (686 bar, 68.9 MPa).
• Long-lasting seals can easily be replaced in less than ten minutes, on location.
• Precision stroke adjustment between 1/2 in to 1 in ensures accurate injection rates.
• HNBR, FKN, FKM ETP, and FFKM plunger packings and check valve seals can handle some of the most aggressive chemicals.
• Low friction drivetrain to optimize electrical efficiency, reducing the load on your power system.
• HNBR, FKN, FKM ETP, and FFKM plunger packings and check valve seals can handle some of the most aggressive chemicals.

UPC Product: 00755652374534 Family Code: FAMOEP Unit of Measure: EA Height: 17.5 IN |44.45 CM Length: 19 IN |48.26 CM Width: 15.5 IN |39.37 CM Volume: 2.982 FT3 |.084 M3 Chargeable Weight: 36.2 LBS  | 16.42 KG

Technical Specifications