Speedhut 2-1/16″ AEM 8.5-18 Air/Fuel Wide Band Gauge (L2-WB3-LEG)

Description

Speedhut 2-1/16″ AEM 8.5-18 Air/Fuel Wide Band Gauge (L2-WB3-LEG) is an essential instrument for anyone needing to accurately monitor their engine’s air-fuel mixture. Designed for seamless integration with AEM inline wideband controllers, this gauge provides precise readings, allowing for optimal engine tuning and diagnostics. Its classic design ensures it complements a variety of interior styles, while the straightforward installation process gets you up and running quickly.

KEY FEATURES AND BENEFITS:

• Wide Measurement Range: Accurately displays air/fuel ratios from 8.5 to 18, providing a comprehensive view of your engine’s combustion.
• AEM Compatibility: Specifically engineered to work with AEM inline wideband controllers, ensuring reliable and accurate data transmission.
• Compact Size: The 2-1/16 inch (52mm) diameter allows for easy mounting in standard gauge pods and dash openings without taking up excessive space.
• Clear Visuals: The gauge provides clear and easy-to-read air/fuel ratio information, allowing for quick assessment of engine conditions.
• Simple Installation: Designed for straightforward installation into a 2.062″ (52mm) hole using the included spin-lock ring.
• Included Harnesses: Comes with a 3 ft power & lighting harness and an 8 ft tachometer harness for easy electrical connections.

SPECIFICATIONS:

• Gauge Type: Air/Fuel Wideband Gauge
• Controller Compatibility: AEM Inline
• Range: 8.5 – 18
• Size: 2 1/16 inch (52mm)
• Hole Size: 2.062 inches (52mm)
• Input Voltage: 0.5 volts (for 8.5 A/F) to 4.5 volts (for 18 A/F)
• Included: 3 ft Power & Lighting Harness, 8 ft Tachometer Harness

HOW TO USE:

• Preparation: Ensure you have an AEM inline wideband controller and its associated wideband oxygen sensor installed in your vehicle’s exhaust system according to the controller’s instructions.
• Mounting the Gauge: Locate a suitable 2.062″ (52mm) diameter opening in your dashboard or gauge pod. Insert the Speedhut Air/Fuel Wide Band Gauge into this opening. Secure it from the rear using the provided spin-lock ring.
• Wiring the Gauge: Connect the 3 ft power & lighting harness to the gauge.
• Connect the power wire (typically red) to a switched 12V power source in your vehicle.
• Connect the ground wire (typically black) to a suitable ground point on your vehicle’s chassis.
• Connect the lighting wire (often orange or similar) to your vehicle’s headlight or instrument panel lighting circuit if you desire the gauge to illuminate with your other lights.
• Connecting to the AEM Controller: Connect the signal output wire from your AEM inline wideband controller to the input wire on the Speedhut gauge. This wire will carry the 0.5V to 4.5V signal corresponding to the air/fuel ratio. Refer to the wiring diagrams for both the Speedhut gauge and your AEM controller for the correct wire connections.
• Testing: Once all connections are secure, start your vehicle. The gauge should now display the real-time air/fuel ratio as reported by the AEM wideband controller.

BENEFITS OF USING THE SPEEDHUT 2-1/16″ AEM 8.5-18 AIR/FUEL WIDE BAND GAUGE (L2-WB3-LEG):

• Precise Monitoring: Gain an accurate and immediate understanding of your engine’s air-fuel mixture, crucial for performance tuning and diagnostics.
• Engine Optimization: By observing the air/fuel ratio, you can make informed adjustments to your engine’s fuel delivery system to achieve optimal power, efficiency, and emissions.
• Early Problem Detection: Identify potential issues such as lean or rich conditions before they lead to significant engine damage or performance degradation.
• Seamless Integration: Designed specifically to work with AEM inline wideband controllers, ensuring compatibility and reliable data.
• Enhanced Awareness: Provides a constant visual indication of a critical engine parameter, allowing you to drive with greater confidence and awareness of your engine’s operation.

FEATURES:

• Displays air/fuel ratios ranging from 8.5 to 18.
• Specifically calibrated for direct input from AEM inline wideband controllers.
• Occupies a standard 2-1/16″ (52mm) gauge mounting location.
• Classic gauge face design for timeless aesthetics.
• Powered and illuminated via the included 3 ft harness.
• Signal input reads 0.5V (8.5 A/F) to 4.5V (18 A/F) from the controller.
• Easy installation with a spin-lock mounting system.
• Comes with an 8 ft tachometer harness for potential future use with other compatible gauges.