Phoenix USA 19.5″ 10 Lug Wheels Front Pair DOT Axle Set (NH5092F)

Description

The Phoenix USA 19.5″ 10 Lug Wheels Front Pair DOT Axle Set (NH5092F) offers a practical and aesthetic upgrade for your commercial vehicle. This kit includes two front wheel simulators crafted from polished stainless steel, designed to enhance the appearance of your truck’s wheels while providing a layer of protection. Engineered for a precise fit on specific models from Ford, Freightliner, Hino, and International, these simulators offer a simple bolt-on installation process.

KEY FEATURES AND BENEFITS:

• Enhanced Appearance: The polished stainless steel finish significantly improves the overall look of your 19.5″ wheels, providing a clean and professional aesthetic.
• Durable Construction: Manufactured from high-quality stainless steel, these simulators are resistant to rust and corrosion, ensuring a long-lasting shine and performance even in demanding conditions.
• Simple Installation: The bolt-on design allows for easy mounting directly over your existing wheel lugs. This eliminates the need to remove lug nuts, simplifying the installation process.
• DOT Compliant: These wheel simulators meet Department of Transportation (DOT) standards, ensuring they are suitable for commercial vehicle use.
• Maintains Warranty: Installation of these simulators will not violate the chassis manufacturer’s warranty, providing peace of mind.
• Easy Maintenance Access: The simulators are designed for easy removal, allowing quick access to tires and wheels for maintenance or repairs.
• Protective Rolled Edge: The inclusion of a protective rolled edge adds to the strength and safety of the simulators.
• Hub Access: Pop-out centers are incorporated into the design, providing convenient access to the wheel hubs without the need to remove the entire simulator.
• Precise Fit: Specifically engineered for 19.5″ wheels with a 10-lug pattern and a 285mm bolt circle on compatible Ford, Freightliner, Hino, and International truck models.

SPECIFICATIONS:

• Product Name: Phoenix USA 19.5″ 10 Lug Wheels Front Pair DOT Axle Set
• Manufacturer Part Number: NH5092F
• Quantity: Pair (2 Front Simulators)
• Wheel Diameter Compatibility: 19.5 inches
• Wheel Width Compatibility: 6.75 inches
• Number of Lugs: 10
• Bolt Circle Diameter: 285 mm
• Number of Hand Holes: 5
• Mounting Type: Over-the-lug, Bolt-On (Stud Mount)
• Material: Polished Stainless Steel
• Compliance: DOT Compliant
• Vehicle Fitment:
  • 1992 to 2021 Ford F600
  • 1992 to 2021 Ford F650
  • 1993 to 2021 Freightliner FL60
  • 1992 to 2021 International 4300/4700 Dura Star
  • 1992 to 2021 International M2
• Included in Kit: 2 Front Wheel Simulators, Mounting Hardware, Installation Tool, Instruction Sheet

HOW TO USE:

• Ensure Compatibility: Verify that the Phoenix USA NH5092F wheel simulator kit is the correct fit for your vehicle’s 19.5″ wheels with a 10-lug pattern and 285mm bolt circle. Refer to the compatibility list provided.
• Prepare the Wheels: Ensure your wheels are clean and free of any debris that could interfere with the simulator’s fitment.
• Position the Simulator: Carefully align the wheel simulator with the lug studs on your front wheel. Ensure the hand holes on the simulator are positioned as desired.
• Secure with Mounting Hardware: Using the provided mounting hardware (typically brackets and nuts), attach the simulator to the lug studs. The specific method may vary slightly depending on the exact hardware included, so refer to the instruction sheet. Generally, you will place the brackets over the studs and then tighten the nuts to secure the simulator firmly against the wheel.
• Tighten Evenly: Gradually tighten the mounting nuts in a star pattern to ensure even pressure and a secure fit. Avoid overtightening, which could damage the simulator or the wheel studs.
• Install Center Caps (if applicable): If your kit includes center caps, align them with the center opening of the simulator and snap them into place.
• Repeat for the Other Front Wheel: Follow the same steps to install the wheel simulator on the other front wheel.
• Final Check: Once both simulators are installed, double-check that they are securely fastened and there is no movement.

BENEFITS OF USING PHOENIX USA 19.5″ 10 LUG WHEELS FRONT PAIR DOT AXLE SET (NH5092F):

• Elevated Vehicle Aesthetics: Instantly upgrades the visual appeal of your truck, providing a more polished and professional image on the road.
• Protection Against Elements: Acts as a barrier, shielding the underlying wheels from road debris, dirt, and harsh weather conditions, potentially prolonging their lifespan.
• Maintains Resale Value: A well-maintained and aesthetically pleasing vehicle often holds a higher resale value.
• Easy Care and Cleaning: The smooth stainless steel surface is easier to clean compared to the intricate design of some wheels, simplifying vehicle maintenance.
• Cost-Effective Upgrade: Offers a significant visual improvement at a fraction of the cost of replacing entire wheels.
• Compliance Assurance: Being DOT compliant ensures that your vehicle meets regulatory standards for commercial operation.

FEATURES:

• Constructed from non-corrosive polished stainless steel for lasting shine.
• Designed for over-the-lug mounting, eliminating the need to remove lug nuts during installation.
• Engineered with a precise 285mm bolt circle and 10-lug compatibility for specific truck models.
• Features five strategically placed hand holes for both aesthetic appeal and potential grip during handling.
• Includes pop-out center sections to allow easy access to the wheel hubs for maintenance without full simulator removal.
• Equipped with a protective rolled edge to enhance structural integrity and user safety during handling.
• Comes as a complete front pair set, providing a balanced and uniform appearance for the front axle.
• Supplied with all necessary mounting hardware and a user-friendly instruction sheet for a straightforward installation process.