Phoenix USA 08-11 Dodge 4500-5500 Alcoa Set (AD08ABS)

Description

Enhance the look and performance of your 2008 to 2011 Dodge Ram 4500 or 5500 series truck with the Phoenix USA 08-11 Dodge 4500-5500 Alcoa Set (AD08ABS). This comprehensive kit provides a significant upgrade over standard steel wheels, offering improved aesthetics, reduced weight, and enhanced durability. The set includes four high-quality Alcoa polished aluminum wheels, specifically sized at 19.5″ x 6″ with a 10-lug pattern on a 225mm bolt circle for a precise fit. To complement the new wheels, the kit also includes Phoenix USA chromed ABS hub covers, adding a touch of style while being compatible with your vehicle’s Anti-lock Braking System. All necessary hardware for installation is included with 40 lug nuts provided, ensuring a complete and hassle-free upgrade process.

KEY FEATURES AND BENEFITS:

• Premium Alcoa Aluminum Wheels: Crafted from forged aluminum, these 19.5″ x 6″ wheels offer superior strength and a lighter weight compared to steel, contributing to improved fuel efficiency and handling.
• Enhanced Aesthetics: The polished aluminum finish provides a bright, lasting shine, significantly upgrading the appearance of your truck and eliminating the need for wheel simulators.
• Corrosion Resistance: Aluminum construction naturally resists rust and corrosion, ensuring long-lasting good looks and reducing maintenance requirements.
• Improved Payload Capacity: The lighter weight of aluminum wheels allows for increased payload capacity, maximizing the utility of your Dodge truck.
• Better Heat Dissipation: Aluminum wheels dissipate heat more effectively than steel, potentially extending the life of your brakes and tires.
• Complete Installation Kit: The set includes four Alcoa wheels, two front and two rear Phoenix USA chromed ABS hub covers, and 40 lug nuts, providing everything needed for a straightforward installation.
• Direct Fitment: Engineered specifically for 2008-2011 Dodge Ram 4500 and 5500 models (both 4×2 and 4×4), ensuring perfect compatibility.
• Hub-Piloted Design: Utilizes a hub-piloted mounting system for secure and precise wheel centering.

SPECIFICATIONS:

• Vehicle Compatibility: 2008-2011 Dodge Ram 4500 and 5500 Series (4×2 and 4×4)
• Wheel Material: Forged Aluminum (Alcoa)
• Wheel Size: 19.5″ x 6″
• Bolt Pattern: 10 Lug on 225mm Bolt Circle
• Hub Cover Material: Chromed ABS (Phoenix USA Inc.)
• Mounting Type: Hub-Piloted
• Included: 2 Front Alcoa Wheels (Part # 763201), 2 Rear Alcoa Wheels (Part # 763202), 2 Front ABS Hub Covers, 2 Rear ABS Hub Covers, 40 Lug Nuts, 4 Logos
• Estimated Weight Savings: Approximately 156 lbs compared to standard steel wheels.

HOW TO USE:

• Preparation: Ensure your vehicle is safely parked on a level surface with the parking brake engaged. Gather the necessary tools, including a lug wrench, jack, and wheel chocks.
• Loosen Lug Nuts: Using the lug wrench, slightly loosen the lug nuts on the wheel you intend to replace. Do not fully remove them at this stage.
• Raise Vehicle: Position the jack under the designated lifting point for your vehicle and carefully raise it until the tire is off the ground.
• Remove Old Wheel: Fully unscrew and remove the loosened lug nuts. Carefully remove the old wheel from the hub.
• Install New Alcoa Wheel: Align the bolt holes of the new Alcoa wheel with the studs on the hub. Mount the wheel onto the hub.
• Install Lug Nuts: Hand-tighten the provided lug nuts in a star pattern to ensure even pressure.
• Lower Vehicle: Carefully lower the vehicle until the new wheel makes contact with the ground, but the full weight is not yet on it.
• Tighten Lug Nuts: Using the lug wrench, fully tighten the lug nuts in the same star pattern to the manufacturer’s recommended torque specifications.
• Install Hub Cover: Align the Phoenix USA ABS hub cover with the center of the wheel and press it firmly into place.
• Repeat: Follow steps 2 through 9 for the remaining three wheels.
• Final Check: After installing all wheels and lowering the vehicle completely, double-check that all lug nuts are securely tightened.

BENEFITS OF USING THE PHOENIX USA 08-11 DODGE 4500-5500 ALCOA SET (AD08ABS):

• Elevated Vehicle Appearance: Instantly transforms the look of your Dodge 4500 or 5500 with the bright, polished aluminum finish.
• Improved Handling and Ride Quality: Lighter wheels can contribute to better steering response and a more comfortable ride.
• Increased Fuel Efficiency: Reduced rotational mass can lead to marginal improvements in fuel economy over long distances.
• Enhanced Durability and Longevity: Forged aluminum is stronger and more resistant to damage and corrosion compared to steel.
• Simplified Maintenance: Aluminum wheels do not require painting and are easier to clean, maintaining their shine with regular washing.
• Potential for Higher Resale Value: Upgrading to premium Alcoa wheels can be a selling point and potentially increase the resale value of your truck.

FEATURES:

• Forged Aluminum Construction: Provides exceptional strength and reduced weight.
• Polished Finish: Delivers a lasting, high-luster appearance.
• ABS Compatible Hub Covers: Specifically designed for vehicles equipped with Anti-lock Braking Systems.
• Direct Bolt-On Installation: Engineered for a seamless fit on specified Dodge models.
• Complete Hardware Included: Comes with all necessary lug nuts for a full set installation.
• Optimized Wheel Dimensions: 19.5″ x 6″ size designed for appropriate tire fitment on these truck models.
• 10-Lug, 225mm Bolt Circle: Ensures secure and precise mounting to the vehicle’s hubs.