Ruffneck FX5/FX6 12″ Frame Pipe Mounting Kit (9727)

Description

The Ruffneck FX5/FX6 12″ Frame Pipe Mounting Kit (9727) is a specialized accessory crafted to provide a secure and adaptable mounting solution for Ruffneck™ FX Series Explosion-Proof Forced Air Heaters (specifically FX5 and FX6 models with a 12-inch frame). This kit addresses installation challenges in industrial environments where traditional wall mounting may not be feasible due to insufficient structural support. By enabling suspension from a standard 3-inch pipe, it offers a flexible and robust way to position your heater for optimal performance and safety, whether indoors or outdoors. Its construction from durable steel with a protective enamel finish ensures longevity and resistance in demanding conditions.

KEY FEATURES AND BENEFITS:

• Optimized Heater Positioning: Enables secure overhead suspension of Ruffneck FX5/FX6 12-inch heaters from a 3-inch pipe, facilitating placement in locations where wall mounting is impractical.
• Enhanced Installation Flexibility: Provides a crucial alternative mounting method for industrial and hazardous environments lacking adequate structural support for direct wall attachment.
• Robust Construction: Made from steel with a wet-applied enamel paint finish, offering resistance to environmental stressors in both indoor and outdoor industrial applications.
• Broad Industrial Application: Suitable for a variety of industrial settings, including those with challenging structural limitations, ensuring proper heater function and safety.
• Weight Capacity: Designed to support the combined weight of the heater, kit, and pipe up to 300 lbs (136 kg), ensuring stable and safe overhead installation.

SPECIFICATIONS:

• Model Number: 9727
• Compatibility: Ruffneck™ FX Series Explosion-Proof Forced Air Heaters (FX5 and FX6 models with 12-inch frame)
• Required Pipe Diameter: 3 inches (76 mm) with a 3½-inch (89 mm) O.D. (pipe not supplied)
• Material: Steel
• Finish: Wet-applied enamel paint
• Maximum Suspended Weight: 300 lbs (136 kg)
• Typical Mounting Height Range: 7.5 ft. to 12 ft.
• CSA-Certified Heater Minimum Mounting Height: 7.9 ft. (2.4 m) above the floor
• Product Weight: 34 lbs
• Warranty: 1-year limited warranty

HOW TO USE:

1. Assess Installation Location: Determine the specific location for the heater, ensuring it allows for optimal air distribution and meets minimum clearance requirements (e.g., 7.9 ft / 2.4 m above the floor for CSA-certified units). Verify that the overhead structure can safely support the combined weight of the heater, mounting kit, and pipe (up to 300 lbs).
2. Prepare the Pipe: Obtain a suitable 3-inch (76 mm) pipe with a 3½-inch (89 mm) O.D. The length of the pipe will depend on your specific installation needs and desired suspension height.
3. Attach Kit to Heater: Position the Ruffneck FX5/FX6 heater. Attach the 9727 mounting kit to the top of the heater cabinet by screwing either two or four 5/8″ NC bolts into the internally threaded holes provided on the heater. Ensure these bolts are tightened securely.
4. Suspend Heater Assembly: Carefully raise the heater assembly (with the mounting kit attached) and suspend it from the prepared 3-inch pipe. Ensure the pipe is properly secured to the overhead structure.
5. Verify Stability and Clearance: Once suspended, double-check that the heater is level and stable. Confirm there is at least 2 inches of clearance behind the fan motor to allow for proper airflow. For transportable structures (like drilling rigs), implement additional support and use lock washers for heightened security against impacts.
6. Connect Utilities: Proceed with connecting the necessary electrical wiring or steam/fluid lines to the heater as per the heater’s specific installation manual and local codes.

BENEFITS OF USING RUFFNECK FX5/FX6 12″ FRAME PIPE MOUNTING KIT (9727):

• Overhead Space Utilization: Frees up valuable floor or wall space by allowing the heater to be suspended overhead, beneficial in compact or busy industrial areas.
• Targeted Heat Distribution: Enables precise positioning of the heater to direct warmth effectively across specific areas, improving heating efficiency.
• Reduced Obstruction: Keeps the heater out of the way of foot traffic or equipment, enhancing safety and operational flow in industrial settings.
• Simple Maintenance Access: Allows for adequate clearance around the heater, simplifying future maintenance tasks such as fan or motor replacement.
• Reliable Support: Provides a dependable and stable platform for explosion-proof heaters, ensuring their safe operation even in demanding or dynamic environments.

FEATURES:

• Facilitates heater suspension from a 3-inch pipe.
• Constructed from robust steel material.
• Features a protective enamel painted finish.
• Designed for use in both indoor and outdoor industrial environments.
• Connects to heater using internal threaded holes.
• Specifically engineered for 12-inch frame Ruffneck FX5 and FX6 heaters.
• Supports overhead mounting of heaters.
• Resistant to common industrial conditions.
• Provides a stable foundation for suspended heaters.
• Offers an alternative to standard wall mounts.
• Includes provisions for secure bolt attachment.