Speedhut 2-1/16″ 0-2.0 Bar Fuel Pressure Gauge (L2-FP6-LEG)

Description

Accurately monitor your vehicle’s fuel system pressure with the Speedhut 2-1/16″ 0-2.0 Bar Fuel Pressure Gauge (L2-FP6-LEG). This metric gauge provides precise readings, ensuring optimal engine performance and helping you identify potential fuel delivery issues. Designed for reliability and ease of installation, it’s a valuable tool for any automotive enthusiast or professional.

KEY FEATURES AND BENEFITS:

• Provides accurate fuel pressure readings: 0 to 2.0 bar (approximately 0 to 29 PSI).
• Utilizes a high-quality 3-Wire Military Grade Transducer (Performance): for dependable measurements.
• Features a standard 2 1/16 inch (52mm) size: for easy integration into most gauge pods.
• Includes necessary wiring harnesses: for both the pressure sensor and gauge illumination.
• Offers clear metric readings: ideal for users preferring the metric system.

SPECIFICATIONS:

• Standard or Metric: Metric
• Gauge Type: Pressure Gauge
• Gauge Subtype: Fuel Pressure Gauge
• Pressure Sender Type: 3-Wire Military Grade Transducer (Performance)
• Range: 0-2.0 bar
• Size: 2 1/16 inch
• Hole Size: 2.062 inches (52mm)
• Warning Light: No
• Ships With:
  • Pressure Sensor – 30 PSI (3-Wire Military Grade Transducer)
  • Pressure Gauge Wiring Harness (3-Wire Cable)
  • 3 ft Power & Lighting Harness – for LED Lit Gauges and Clocks

HOW TO USE:

1. Mount the Gauge: Install the 2 1/16″ gauge into a 2.062″ (52mm) diameter opening in your desired location. Secure it using the appropriate mounting hardware.
2. Install the Pressure Sensor: Locate a suitable point in your vehicle’s fuel system to install the included 3-wire pressure sensor. Ensure the sensor is properly sealed.
3. Connect the Sensor Wiring: Using the provided Pressure Gauge Wiring Harness (3-Wire Cable), connect the three wires from the pressure sensor to the corresponding terminals on the back of the gauge.
4. Connect Power and Lighting: Attach the 3 ft Power & Lighting Harness to the gauge. Connect the power wire to a switched 12V source in your vehicle, the ground wire to a suitable ground point, and the lighting wire to your vehicle’s lighting circuit if you desire the gauge to illuminate with your other lights.
5. Verify Connections: Double-check all wiring connections to ensure they are secure and correct.
6. Test the Gauge: Start your vehicle and observe the fuel pressure reading on the gauge to confirm proper operation.

BENEFITS OF USING THE SPEEDHUT 2-1/16″ 0-2.0 BAR FUEL PRESSURE GAUGE (L2-FP6-LEG):

• Ensure Proper Fuel Delivery: By providing accurate readings, you can confirm that your engine is receiving the correct amount of fuel for efficient operation.
• Identify Fuel System Issues Early: Fluctuations or incorrect pressure readings can indicate problems with the fuel pump, fuel filter, pressure regulator, or fuel lines, allowing for timely diagnosis and repair.
• Optimize Performance Tuning: When modifying your engine for increased performance, a fuel pressure gauge is essential for ensuring safe and effective tuning.
• Gain Peace of Mind: Knowing your fuel system is functioning correctly provides confidence and reduces the risk of unexpected breakdowns.

FEATURES:

• Precise metric measurement: Displays fuel pressure clearly in bar (0–2.0 bar range).
• High-performance sensor included: Comes with a robust 3-wire military-grade transducer capable of reading up to 30 PSI.
• Complete wiring solution: Includes dedicated harnesses for both the pressure sensor signal and the gauge’s power and LED illumination.
• Standard fitment: The 52mm size ensures compatibility with a wide range of gauge pods and mounting options.
• Reliable connection: The included 3-wire cable for the sensor ensures a stable and accurate signal transmission to the gauge.