Phoenix USA 96″ x 7/8″ SS Grab Rail Kit (GRSS96)

Description

The Phoenix USA 96″ x 7/8″ SS Grab Rail Kit (GRSS96) provides a practical and reliable solution for adding secure handholds to a variety of applications, particularly for commercial vehicles like trucks, wreckers, tow trucks, and flatbeds. This comprehensive kit includes two robust 96-inch long stainless steel grab rails with a comfortable 7/8-inch outer diameter, ensuring a firm and easy grip. To facilitate secure installation, the kit also contains four chrome-plated end stanchions and four center stanchions, designed to provide stable mounting points for the pair of rails. Constructed from quality stainless steel, the grab rails are built to withstand demanding environments, offering long-lasting performance and a clean, professional appearance. This kit is designed to enhance safety and convenience by providing stable support for entering, exiting, or moving around a vehicle or work area.

KEY FEATURES AND BENEFITS:

• Enhanced Safety: Provides secure handholds to improve stability and reduce the risk of slips and falls, particularly on commercial vehicles.
• Durable Construction: Manufactured from stainless steel tubing, offering resistance to corrosion and wear for long-term use in various conditions.
• Comfortable Grip: The 7/8-inch outer diameter of the rails provides a comfortable and secure gripping surface for users of all hand sizes.
• Complete Kit: Includes two 96-inch grab rails and eight sturdy stanchions (4 end, 4 center) for a comprehensive installation.
• Stable Mounting: The included end and center stanchions ensure a firm and reliable attachment to the intended surface.
• Versatile Application: Suitable for a wide range of vehicles and other applications where additional grab handles are needed for safety and convenience.
• Professional Appearance: The polished stainless steel rails and chrome-plated stanchions offer a clean and professional aesthetic.
• Easy Installation: Designed for straightforward installation with appropriate mounting hardware (typically included, but always verify with the seller).

SPECIFICATIONS:

• Rail Length: 96 inches (8 feet)
• Rail Diameter: 7/8 inch
• Rail Material: Stainless Steel
• Stanchion Material: Chrome-Plated (End and Center)
• Number of Rails: Two (2)
• Number of End Stanchions: Four (4)
• Number of Center Stanchions: Four (4)
• Finish (Rails): Likely Polished Stainless Steel
• Finish (Stanchions): Chrome-Plated
• Typical Kit Contents: 2x 96″ Stainless Steel Grab Rails, 4x End Stanchions, 4x Center Stanchions, Mounting Screws (check specific listing)
• Approximate Weight (Kit): 9.97 lbs (with screws)
• Approximate Packaging Dimensions: 99.0″ (L) x 6.0″ (W) x 4.0″ (H)

HOW TO USE:

1. Determine Mounting Locations: Identify the desired locations for the grab rails, ensuring they provide optimal support and accessibility. Consider factors like entry/exit points or areas requiring stable movement.
2. Position End Stanchions: Place the end stanchions at the desired starting and ending points for each grab rail. Ensure they are aligned and spaced appropriately for the 96-inch rail length.
3. Mark Mounting Holes: Using the base of the end stanchions as a template, mark the locations for the mounting screws on the chosen surface.
4. Drill Pilot Holes (If Necessary): For hard surfaces, pre-drilling pilot holes can make screw installation easier and prevent damage. Use a drill bit size appropriate for the mounting screws.
5. Attach End Stanchions: Securely fasten the end stanchions to the mounting surface using the provided stainless steel screws. Ensure they are firmly attached and can support weight.
6. Position Center Stanchions: Place the center stanchions along the length of each 96-inch grab rail, equally spaced between the end stanchions. This provides additional support and stability.
7. Mark Mounting Holes (Center Stanchions): Similar to the end stanchions, mark the screw locations for the center stanchions.
8. Drill Pilot Holes (If Necessary – Center Stanchions): Pre-drill pilot holes for the center stanchion screws if needed.
9. Attach Center Stanchions: Securely fasten the center stanchions to the mounting surface using the provided screws.
10. Insert Grab Rails: Carefully insert the 7/8-inch stainless steel tubes into the openings of the securely mounted end and center stanchions. Ensure the rails are fully seated and stable within the stanchions.
11. Inspect and Test: Once installed, inspect all mounting points to ensure they are tight and secure. Gently test the grab rails to confirm they provide stable support.

BENEFITS OF USING THE PHOENIX USA 96″ X 7/8″ SS GRAB RAIL KIT (GRSS96):

• Increased Safety for Users: Provides reliable handholds, significantly reducing the likelihood of accidents caused by slips or instability when moving around vehicles or work areas.
• Improved Accessibility: Makes it easier and safer for individuals to enter and exit vehicles, especially those with limited mobility or in challenging conditions.
• Long-Lasting Performance: The stainless steel construction ensures resistance to rust and corrosion, providing a durable and reliable safety solution for extended use.
• Enhanced Stability: The multiple mounting points provided by the end and center stanchions ensure the grab rails are firmly secured and can withstand regular use.
• Professional and Clean Look: The polished stainless steel and chrome-plated finish contribute to a professional appearance on any vehicle or application.
• Convenient and Complete Solution: The kit includes all the necessary components (two rails and eight stanchions) for installing two secure grab rails.
• Versatile Application Across Industries: Suitable for a wide range of commercial vehicles and other settings where safe and reliable handholds are required.

FEATURES:

• Twin 96-Inch Stainless Steel Tubes: Offers ample gripping length for various needs.
• 7/8-Inch Outer Diameter: Designed for a comfortable and ergonomic grip.
• Eight Stanchions Included: Provides multiple strong and stable mounting points (four at the ends, four in the middle).
• Chrome-Plated Stanchion Finish: Offers a durable and visually appealing finish for the mounting brackets.
• Corrosion-Resistant Stainless Steel Rails: Ensures longevity and performance in various environmental conditions.
• Designed for Secure Attachment: Engineered to provide a stable and reliable handhold when properly installed.
• Suitable for Aftermarket Installation: Can be added to existing vehicles or structures to enhance safety and accessibility.